NJS NJS801, Инструкция по эксплуатации

Страница: 4 / 12

ConnecGon of an External Amplifier
The keyboard has a built-­‐in loudspeaker system and can also be
connected to an external amplifier. First turn off the keyboard,
then connect to the amplifier.
Connect to the socket labelled (Output) on the back of the
keyboard:
If the amplifier is fiLed with RCA Phono sockets, use two mono
3.5 mm jack to phono plug leads, such as A118.
If the amplifier is fiLed with 6.35 mm jacks, then use two mono
3.5 mm jack to 6.35 mm jack leads such as A120BA.
Headphones (included) and Microphone (not included)
(1) When you are prac-sing or performing, stereo headphones can
be used to monitor the performance. Use 32Ω headphones, fiLed
with a stereo 3.5 mm jack, and connect to the socket on the rear
panel labelled “Output”. Connec-ng the headphones will cause
the speakers to be muted.
(2) A microphone can be connected to the 3.5 mm jack on the rear
panel, so that the built in speaker system can be used to amplify
the vocals.
Page 4