Page 6
Maintenance
Before cleaning, turn the amplifier off, and disconnect from the mains supply. The
product may then be cleaned using a damp cloth with a drop of washing-up liquid
to remove any dust or dirt from the case. Do no use stronger detergents or
solvents as these may damage the surface finish.
Using a dry 1" (25mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or an
authorised service centre.
If the mains plug needs to be replaced, proceed as follows:
Connect the brown wire to the
terminal labelled "L".
Connect the blue wire to the
terminal labelled "N".
Connect the green/yellow wire
to the terminal labelled with the
earth symbol or "E".
Make sure that the cord-grip is
positioned correctly (over the
outer sheath of the cable) and is
fully tightened.