Njoy SNMP Card PM Lite, Руководство пользователя

Страница: 4 / 7

6 7
Figure 1. The main window of the “Power Device Network Utility” program.
4. Select the Power Management Card you are setting up. Click on the Tools
menu and select “Device Setup” or double click the device you want to
configure.
5. You can modify the IP Address, Subnet Mask, and Gateway address for
the Device MAC Address listed in the Device Network Settings window,
as shown in Figure 2. The factory default IP Address is 192.168.20.177
and the default Subnet Mask is 255.255.255.0.
Figure 2. The Device Network setting window.
6. Modify the IP, subnet mask or gateway address. Enter the new addresses
into the corresponding fields and then click “Save”.
7. You will need to enter a User Name and Password for the Power Manage-
ment Card in the authentication window, as shown in Figure 3.
Default user name: admin
Default password: admin
Figure 3. Authentication window.
8. If the IP address change is successful, you will see a message confirming
the IP set up is OK, as shown in Figure 4.
Figure 4. Setup IP Address successfully message.
9. In case the change is not successful, for example, if the IP address
change is unsuccessful you will see a warning message. Attempt to
make the desired changes again. If the problem persists please see the
Troubleshooting section for help.