Njoy PSAD-12CB21X-CK01B, Руководство пользователя

Страница: 4 / 11

06 07
Accessories 4
NOTE:
If any of the above package content is missing or is
damaged please contact the shop where you have bought the
product from.
1 2 3
1. Keys for door lock.
2. Screws and raw plugs for
wall-mounting.
3. Small screws for locking case
lid.
Installation 5
ATENŢIE!
Before starting the installation please make sure
your system is turned off and disconnected from the
AC power supply.
Use only the original cable. Using a different cable
may lead to major defects!
Step 1. Mount the enclosure in a preselected location
that is not in direct sunlight and is protected from
moisture.
Step 2.
Knock out the appropriate prefabricated 22mm
conduit holes for your input & output cables.
Step 3. Turn the internal power switch to the “OFF”
position.
Step 4. Connect all of your camera cables to the
individually protected 12Vdc outputs,accessed via
the terminal block marked “(+)” & “(-)”.
Step 5.
Connect battery with Battery charging cables,
make sure “(+)” & “(-)” of battery connected
correctly.
Step 6. Fix the battery via battery fixing mount.
Step 7. Connect AC 100-240Vac mains voltage to the AC
input 3 pins IEC socket.
Step 8. Turn the internal power switch to the “ON”
position. The green LED located on the front of the
unit should now be illuminated.
Step 9. Close the cover and secure it with the door lock
and provided screws.
Engli
sh
Română