background image

User Manual - Njoy your heavy-duty storage 175kg.

NJOY your storage

STORAGE RACK 175 KG
16C09/18000

 

To ensure safe operation, follow all safety precautions in this manual.

Read and save this manual. Please read these instructions carefully before using the product. Protect yourself and 
others by observing all safety information, warnings and precautions. Non-observance of the instructions may 
result in personal injury and/or damage to the product or property. Keep the instructions for future reference.

Safety Instructions

If the connecting tabs of the cross member of the board have to bend during assembly, they can be bent back to 
their original position using a flat screwdriver.

The shelf unit must not be selectively subjected to the specified load capacity of 175 kg per shelf. The load on 
the shelves must be evenly distributed so that no damage can be caused to the wooden shelves. The unit is not 
suitable for rooms with high humidity, as this can cause damage to the wooden shelves.

Warning!

 Always wear gloves to avoid injury when installing the unit. Never exceed the maximum load or the 

maximum load of the entire unit.

Warning! 

 For your safety, the rack must always be mounted with a suitable wall mount.

1. Please read the advice and safety instructions carefully before installing the rack.
2. Remove all packing materials. Check that all components are fully supplied (see list of components).
3. Warning: Before mounting, check the product for shipping damage. No liability is accepted for damage to an 
already assembled product!
4. To avoid scratches, mount this product on a clean and smooth surface. (e.g. a carpet)
5. Use a rubber hammer to avoid damaging the finish.
6. Place the unit only on a horizontal, smooth floor, otherwise stability and maximum load-bearing capacity cannot 
be guaranteed.
7. Disclaimer: Liability - also for consequential damage - is excluded if a defect is caused by incorrect or improper 
installation.
8. Only use plugs and support screws that are suitable for your type of wall and the weight of the device. (Wall 
plugs or screws and tools for wall mounting are not supplied with the product).

Warning: 

Do NOT drill into water or power lines during installation.

N-JOY

N-JOY

storage

storage

your

Содержание 16C09/18000











Отзывы: