Nixeus Vue 27" S-IPS 2560x1440 LED Monitor (NX-VUE27)
Box Contents:
Stand Base x 1 (with 4 screws)
Dual Link DVI-D Cable x 1
Power Adapter & Power Cable x 1
3.5mm Audio Auxiliary Cable x 1
NX-VUE27 User Guide
Carefully lay the monitor face down on a static free, clean, flat surface. Connect base to
stand and line up connection holes. With the four connection screws provided, secure
base to stand.
Installing Base Stand: (Tools needed – Philips Screw Driver)
Input and Connection Ports
NX-VUE27 Power Adapter:
Only use the power adapter included with the NX-VUE27. Using any other
un-authorized power adapters may damage your monitor and void your warranty.
Adjusting Monitor Height and Tilt:
Make sure the NX-VUE27 is on a stable level surface. Holding the top and bottom bezel
with your hand, carefully raise the monitor to desired height. You may also tilt monitor
forward and backward by up to 15 degrees.
Pivot Monitor to Portrait Mode:
Make sure the NX-VUE27 is on a stable level surface. Raise monitor to highest height
and tilt slightly back. Hold each side of the monitor’s bezel with your hands and
carefully rotate monitor clockwise to desired orientation.
