Nixeus Technology, Inc
Nixeus Vue 27" S-IPS 2560x1440 LED Monitor
(NX-VUE27)
Please make sure your computer hardware graphics card supports the Nixeus Vue 27" S-IPS Monitor. Some devices and
connections may not be able to support the full 2560x1440 resolution and 16.7 million colors. If you are not sure, please contact
your computer hardware's manufacturer. Please read this manual before using the Nixeus Vue 27” NX-VUE27 with your
computer. It contains important information regarding use and care of S-IPS Monitors.
Important Note:
1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.
Safety and Maintenance:
2) Remove or secure any objects that may fall into the monitor's vents. Do not obstruct or block the cooling vents of the
monitor.
3) Don't jam the vents on the enclosure.
4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.
5) When disconnecting the power cord or DC power line for the monitor, please wait for 6 seconds before reconnecting the
power cord or DC power line wires for normal operation.
6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are missing, please
contact Nixeus for a replacement. Using un-authorized power connectors may damage your monitor and void your warranty.
7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not over-clock or modify
the monitor's decoder board. Please do not apply excessive force to the LCD panel or drop the monitor. Warranty does not
cover physical damages, over-clocking, and modifications to the monitor.
8) When monitor is not in use for a long period of time, please disconnect the power plug.
9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do not use
organic solvent, alcohol, or ammonia liquid to clean the monitor.
10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and to prevent
monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets wet, please wipe clean with
soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor, please disconnect power adapter
immediately. For service please contact Nixeus Technical support for service and repair at
11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum conditions:
Temperature = 0-40 degrees Celsius (32-95 degrees Fahrenheit), Humidity = 20-80% RH
1) When the monitor is on and unattended, please use a moving screen saver. If there is a static (non moving image) on the
screen, please refresh regularly or start an application to start using the screen.
Avoiding Image Persistence, Incidental Image or After Image:
2) Long time continuous display of static images may case a "brand" on the screen; this is also called "image persistence" or
"incidental image" or "after image." "Brand," "incidental image" or "after image" is a common phenomenon of LCD Panel
Technology. In most cases, after turning off the power supply for a certain amount of time the "brand," "incidental image” or
"after image" will gradually disappear. Also by displaying a pure white image for the entire screen for the same duration that
you had the static image that caused the image persistence may remove the image persistence. Please contact Nixeus if you
need assistance in removing image persistence.
CAUTION:
If your monitor needs replacement parts, warranty service, and repairs please do not attempt to do it yourself! Doing so may
void the warranty. Please contact
for warranty support. For more information please visit
www.nixeus.com
Serious "brand," "incidental image" or "after image" will not disappear and cannot be repaired. This type of
damage is not covered by warranty. Please take good care of your monitor to prevent serious "brand," "incidental image" or
"after image."
