30
DDCI (Display Data Channel Command Interface)
The DDCCI feature allows you to use a 3
rd
Party application or software to control the PICTURE and COLOR settings in the
On Screen Display Menu (OSD) of the monitor without using the OSD itself.
a) To bring up the OSD Main Menu, press
[M].
b) Using the
and buttons, navigate to ADVANCE and press
[M]
to enter the ADVANCE sub-menu.
c) Using the
and buttons, navigate to DDCI and press
[M].
d) Next use the
and buttons to adjust the DDCI to either OFF or ON and press
[M]
to confirm the settings.
e) Last, press
[E]
to exit out of the ADVANCE sub-menu or proceed to the next ADVANCE setting you want to adjust.
Note: DDCI is a display data channel/command interface for remote diagnosis and control. Based on the DDC/CI
protocol, users can use the mouse and a user-friendly software interface to complete the various settings and color
adjustments of the display without using the traditional OSD menu. If have the software in your PC, you can install and
adjust the settings on the software interface. If you don’t have the software or you do not want to use software to
adjust, you can set DDC/CI to OFF. The DDC/CI protocol is mainly used to control the settings of display devices, such as
brightness and contrast. It is a half-duplex communication protocol based on the I2C protocol. The PC initiates a control
request and displays device in passive response mode. Nixeus does not provide the software to use with DDCI features.
