Setting Parameters
page 129
NF 650 - rev. 01 / 29.06.2020
The statistics (Serial Stats, Frame Stats and Application Stats) are arranged in layers. Each
one can be reset after viewing.
Serial Stats
relate to the serial interfaces (not with access via Modbus TCP) and provide
information on the number of received, transmitted and rejected/lost bytes.
Frame Stats
refer to the communication frame and provide information on sources of errors
such as the sequence of bytes, checksums, parity, valid packets and other errors.
Application Stats
concern the application level and provide information on functional errors
such as unsuccessful transmissions, not supported function codes, not assigned data addres-
ses and other errors.
36 Display Parameter Menu
The following settings can be adjusted in the display menu:
• Backlight
• Designation of the five main screen fields
• Decimal places of individual value representations
Fig. 36-1
Display / backlight / delay time
(Dim) backlight
The backlight can be adjusted in ten levels.
Adjust the backlight to the ambient conditions. Avoid setting the display too bright.
In order to extend the display life NIVUS recommend to enable the automatic display dimming
option here (dim light). The display will dim automatically if it has not been used for a certain
time. This period can be determined by using the delay time option (never, 30 s, 1 min, 2 min
and 5 min).
As soon as settings are made on the transmitter (e.g. pressing a key) the display will go back
to standard brightness.
Analog to display dimming the display can be also switched off (delayed) to save energy or
remain to be switched on constantly.
Default setting:
brightness level “8”, dim backlight and switch off display “Never”.
Advance main display (for multiple measurement place types only)
If the check mark is set, the main display automatically switches back and forth between the
activated measurement points. Each measurement point and its current values are displayed
for approx. 5 s without any further settings.
Содержание NivuFlow 650
Страница 39: ...Installation and Connection page 39 NF 650 rev 01 29 06 2020 Fig 21 4 Terminal connections NivuFlow 650 Type T4...
Страница 41: ...Installation and Connection page 41 NF 650 rev 01 29 06 2020 Fig 21 6 Terminal connections NivuFlow 650 Type TZ...
Страница 173: ...Approvals and Certificates Page 173 NF 650 rev 01 29 06 2020 Approvals and Certificates...
