Your appliance will start the respective cleaning or maintenance programme and will ask you in the
display for further steps.
➔
Follow the instructions on the display. If in doubt go to 5.1. to 5.9. for more details.
5.1. Rinsing the milk frother
Note: Do not disrupt the running program!
We advise you to rinse the frother after each drink for which milk was used, it should definitely be
rinsed when the display asks you to do so.
➔
Turn the rotary control to “MAINTENANCE” and press it.
➔
Turn the rotary control to “RINSE FROTHER” and press it.
The display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
➔
Connect the hose to the spout (fig. 7).
➔
Connect the other end to the back of the drip tray (fig. 10).
➔
Place a sufficiently large bowl (about 0.5 l) under the spout.
➔
Press rotary control.
The display shows “RINSING FROTHER, DO NOT REMOVE HOSE”. The appliance then starts the
cleaning process. Once the process is finished the appliance reheats and is ready for use. The display
shows the main menu.
5.2. System rinsing
From time to time the system should be rinsed. Proceed as follows:
➔
Turn the rotary control to “MAINTENANCE” and press it.
➔
Turn the rotary control to “SYTEM RINSING” and press it.
The display shows “RINSING SYSTEM”.
Once the process is finished, the appliance reheats and is ready for use. The display shows the main
menu.
5.3. Cleaning frother
Attention: Do not disrupt the running program!
Note: The display shows “PLEASE CLEAN FROTHER” when it is required.
Proceed as follows:
➔
Turn the rotary control to “MAINTENANCE” and press it.
➔
Turn the rotary control to “CLEAN FROTHER”.
The display shows “EMPTY TRAYS” and “FILL WATER” alternatingly.
➔
Remove drip tray with used coffee container (fig. 1/N and 1/O) and empty both.
➔
If necessary refill the water tank with fresh water. Reinsert the water tank first, followed by drip
tray and used coffee container.
The display shows “CONNECT HOSE TO SPOUT AND IN CLEANER”.
➔
Connect the hose to the spout (fig. 7).
➔
Put some detergent (available as an optional accessory, see 8.) and water in a container, both
should amount to 0,3l. For the correct mix refer to instructions by the detergent’s manufacturer.
➔
Dip the other end of the hose into the cleaning solution
➔
Place a sufficiently large bowl (minimum contents 0.5 l) under the spout.
➔
Press the rotary control.
The display shows “START CLEANING”.
➔
Press the rotary control.
The cleaning process is started. The display shows “CLEANING FROTHER. DO NOT REMOVE
83
GB
5. Cleaning and maintenance
04_Niv_859_BDA_sw_GB_03.indd 83
13.04.17 15:42
