Nivona CafeRomatica NICR626 Скачать руководство пользователя страница 11

Страница: 11 / 12

Fault

Cause

Solution

No hot water or steam

Blocked steam/hot water jet/
Spumatore (fig.1/L)

Dismantle and thoroughly

clean steam/hot water jet/
Spumatore (fig.3)

System may be calcified

Please run a high dosage of

descaler (see chapter 4.3)

Not enough milk froth or
liquid froth

Unsuitable milk

Use cold milk

Blocked steam/hot water jet /
Spumatore

Dismantle and thoroughly

clean steam/hot water jet/
Spumatore (fig.3)

Coffee only drips

System may be calcified

Please run a high dosage of

descaler (see chapter 4.3)

Coffee is too finely ground

Set the grinder on a coarser

setting

Coffee powder too fine

Change to coarser coffee

powder

No “crema” on the coffee

Unsuitable coffee beans

Change coffee beans

Beans may be too old

Change to fresh beans

Grinding coarseness not
adjusted to beans

Optimize grinding

coarseness

Strong noise from coffee
grinder

Foreign matter in grinder,
e.g. small stones

Call service hotline, ground

coffee can still be made

6. Problem solving

In the event of a fault or a system report which you cannot correct yourself, please contact our email
([email protected]) or Service-Hotline: 0049 911-25266390

If the system detects any errors, the display will show an error report

flashing bars or

lighted bars.

Attention: Please make a note of the flashing or lit up bars. Switch the appliance off and pull the mains

plug. Then call the service hotline 0049-911-25266390 or email ([email protected]) us with name
type, serial number (see type label, fig.1/S) and error number. Our service team will take care of the
next steps.

7. Replacement parts/Accessories

Fresh water filter NIRF 700:

New fresh water filters are available from well-stocked local dealers.

Cleaning tabs NIRT 701:

New cleaning tabs are available from well-stocked local dealers.

Descaling agent NIRK 703:

New descaling agents are available from well-stocked local dealers.

Special milk residue cleaner NICC 705:

Special milk residue cleaner is available from well-stocked local dealers.

MilkCooler NICT 500:

This top-quality stainless steel milk cooler keeps milk „fridge cold“ for a long time and delivers the
best frothing results.

MilkContainer NIMC 900:

MilkContainer is made from transparent synthetic material to show the filling level at a glance.

8. Customer service, guarantee, environmental protection

Customer service

Nivona products are manufactured to the highest quality standards. Should any question arise with
regards to your appliance, please do not hesitate to write to us. Only with your active support will we
be able to improve our products and further develop them, so that they will fully satisfy your demand.
In the event that you need to ship your faulty appliance directly to us, please make sure that no
residual water remains in the system:

Switch the appliance off.

Press the on/off switch (fig. 1/J) and the steam/rinsing button (fig. 1/E) simultaneously for at
least 3 seconds.

Remove the water tank (fig. 4).

Place a sufficiently large bowl (minimum contents 0.5 l) under the steam/hot water jet /
Spumatore.

Turn the steam/hot water control (fig. 1/C) clockwise all the way.

The appliance is now steaming off. All 5 red bars are flashing in the display.

When symbol S12

shows, turn the steam/hot water control (fig.1/C) anti-clockwise.

The appliance will then switch off.

Remove drip tray with used coffee container (fig. 1/O and 1/P) and empty both.

Reinsert drip tray and used coffee container.

Your appliance is now ready for shipment.