8
2. Set up
2.1 Preparing the machine
Carefully remove the machine and
all parts from the packaging.
Note:
If you need to return your
machine for servicing, it can be
sent by post in the original packag-
ing. Please keep all packag ing and
protective material for this purpose.
➔
Remove the water reservoir
(fig. 1/B and 2) and wash it out
with cold, fresh tap water.
➔
Then fill the reservoir up to the
“max.” mark and replace it in the
machine. Make sure that it clicks
into place.
Note:
Only fill the reservoir with
fresh, cold water. Do not use car-
bonated water or other liquids.
➔
Open the lid of the coffee con-
tainer (fig. 1/N) and add coffee
beans.
Note:
Do not use beans which have
been treated with supplements,
such as sugar, during or after the
roasting. Supplements can damage
the grinding mechanism and any
repair costs arising as a result are
not covered by the guarantee.
Please make sure the steam / hot
water valve control knob (fig. 1/Q
and 7) is turned to ‘0’!
2.2 Getting started
➔
Remove the plug from the
power cord compartment (fig. 1/V)
and plug the machine in.
➔
Switch the mains supply on
(fig. 1/S). The On / Off button
(fig. 1/F) lights up.
➔
Press the On / Off button
(fig. 1/F). „SYSTEM HEIZT“
(“SYS. IS HEATING”) appears in
the display.
➔
After the machine has warmed
up, the service button (fig. 1/I)
flashes. The instruction „BITTE
SPÜLEN“ (“PLEASE RINSE”)
flashes in the display.
➔
Now place a cup under the
height-adjustable coffee spout
(fig. 1/J and 5) and press the ser-
vice button (fig. 1/I). The system
is then filled with water and com-
pletely rinsed out via the coffee
spout (fig. 1/J and 5).
➔
The machine is now operational.
Note:
Please see point 4.5 to
change language!
Note:
For manufacturing reasons,
the machine hoses may still be
empty when the machine is first
operated. The machine indicates
this as follows:
➔
After the machine has been
switched on using the On / Off but-
Downloaded from CoffeeMachineManual.com Manuals
