Nivona CafeRomatica 605, Инструкции по эксплуатации и полезные советы

Страница: 17 / 27

Note: If none of the dots turn red
on the test strip, please set to
level 1.
➔
Switch your machine ON.
➔
Press the steam warm-up button
(fig. 1/O) for about 5 seconds.
➔
The water hardness is indicated
by the number of buttons lit up as
detailed below.
➔
Press the steam warm-up button
repeatedly until the buttons which
indicate your level of water hard-
ness light up.
➔
Press the coffee strength button
to confirm.
➔
To confirm your settings, the
buttons which indicate the level
selected flash twice consecutively.
➔
The programming operation is
then complete and the system is
restored to coffee-brewing mode.
Note: If you interrupt your pro-
gramming operation for more than
1
1 /
2
minutes, your machine goes
automatically back into coffee-
brewing mode.
4.3 Temperature
You can change the coffee temp -
er ature as desired (the default
sett ing is ‘high’):
Normal = Coffee strength button is
lit up
High = Coffee strength button and
1-cup button are lit up
Maximum = coffee strength button
and 1-cup button and 2-cup button
are lit up
➔
Press and hold the 1-cup button
(fig. 1/F) for about 5 seconds.
➔
The buttons which indicate the
current temperature setting light
up as detailed above.
➔
You can change to the other
temperature setting by pressing
the 1-cup button.
Press the coffee strength button to
confirm the desired temperature
sett ing. The buttons which indicate
the setting flash twice to confirm
the selection.
Note: If you interrupt your pro-
gramming operation for more than
1
1 /
2
minutes, your machine auto-
matically switches back into coffee-
brewing mode.
4.4 Automatic switch off
This function allows you to pro-
gram the machine to switch OFF
automatically given number of
hours after the last brewing
operation. The follow ing settings
are possible. After:
➔
5 minutes = coffee strength
button is lit up.
46
... 4. Programming functions