background image

6

fundamental, do take an important part in the use, transport and storage 
of the paraglider:

-  The large capacity kargo rucksack, ideal for packing the harness as 
well as the glider.
-  An inner folding bag making the glider folding process easier. 
-  An adjustable folding strap for quick and easy packing.
- speed bar
- A small fabric repair kit with self-adhesive ripstop nylon (matching the 
wing’s colour scheme) and replacement maillon blockers.

2. uNpACkiNG ANd AssemBlY 

2.1 CHoosiNG THe riGHT loCATioN

We recommend unpacking and packing your wing on a school slope or a 
flat obstacle free area and in low wind speed. it will help you to carry out 
all the recommended steps required to check and inflate the koYoT 3.

We recommend having professional supervision during the initial 
unpacking and assembly procedures.

2.2 proCedure

Take the paraglider out of the rucksack, open it and spread it with the 
lines on top of the intrados. position the wing as if you were to inflate it. 

Check the condition of the fabric and the lines for abnormalities. pay 
attention to the maillons connecting the lines to the risers to make sure 
they are fully closed and tightened. identify and if necessary disentangle 
the lines from the A, B and C risers, the toggle lines and corresponding 
risers; they must be tangle and/or knot free.

2.3 HArNess AssemBlY

The koYoT 3 risers come with different colours: 

- right side in green
- left side in red

This feature helps the pilot to better identify each side during the pre-
flight phase and in flight. 

Correctly connect the risers to the harness carabiners. The risers and 
lines cannot have any twists and must be in the right order. Check for the 
harness buckles to be properly fastened and securely locked.

2.4 HArNess TYpe

The koYoT 3 can be flown with most of the harnesses found on the 
market today, including the cocoon style models. 

We strongly recommend adjusting the distance between the chest 
strap carabiners according to the settings used during the certification 
procedure. The distance will vary according to the size of the chosen 
harness model.

incorrect chest strap adjustments can affect glider/harness behaviour 
and thus glider handling. Too wide a distance between the carabiners will 
provide greater feedback from the wing but less glider stability. Too narrow 
a distance will not bring as much feedback in addition to increasing the risk 
of experiencing a riser twist during a collapse.

in any case, it is appropriate to refer to the harness’s instruction manual 
and the certification test report outlining the chest strap length adjustments 
used for these tests.

2.5 ACCelerATor AssemBlY

The koYoT 3 acceleration mechanism is engaged when foot pressure is 

Содержание KOYOT 3


























Отзывы: