78
PSK adapts CCMP (Cipher Block Chaining Message Authentication Code Protocol) of the AES
(Advanced Encryption Security) algorithms.
WPA Shared Key:
The key for network authentication. The input format is in character style
and key size should be in the range between 8 and 63 characters.
Group Key Renewal:
The period of renewal time for changing the security key automatically
between wireless client and Access Point (AP). Default value is 3600 seconds.
Click Apply to confirm the settings.
WEP
RADIUS / 802.1x:
Whether to enable RADIUS / 802.1x.
WEP Authentication:
To prevent unauthorized wireless stations from accessing data
transmitted over the network, the router offers secure data encryption, known as WEP. There
are 3 options to select from:
Open System, Shared key
or
both
.
Default Used WEP Key:
Select the encryption key ID; please refer to
Key (1~4)
below.
Passphrase:
This is used to generate WEP keys automatically based upon the input string and
a pre-defined algorithm in WEP64 or WEP128.
Key (1-4):
Enter the key to encrypt wireless data. To allow encrypted data transmission, the
WEP Encryption Key values on all wireless stations must be the same as the router. There are
four keys for your selection. The input format can be either HEX style or ASCII format, 10 and
26 HEX codes or 5 and 13 ASCII codes are required for WEP64 and WEP128 respectively.
Click Apply to confirm the settings.
Note: For information about settling Radius/802.1x, please refer to
WLAN
setup section.
Содержание NWAR33P
