Chapter 2: Preparing for Management
Preparation for Web Interface
NR-10 Router User Manual | 15
2.1. Preparation for Web Interface
The management web page allows you to use a web browser (such as Microsoft IE, Google
Chrome, or Mozilla Firefox) to configure and monitor the router from anywhere on the
network.
Before using the web interface to manage your router, please verify that your switch and
your PC are on the same network. Please follow the steps down below to configure your PC
properly:
1.
Verify that the network interface card (NIC) of your PC is operational and properly
installed, and that your operating system supports TCP/IP protocol.
2.
Connect your PC with the switch via an RJ45 cable.
3.
In default setting, the router is set to the “Gateway” mode. Under this mode, the router
will assign IP addresses to devices that are connected to it. Please make sure that the
setting of your PC’s NIC is set to “Obtain an IP address automatically” as shown in the
figure down below.
