Lock Emitting:
When our 3D laser is in the mode of Pendulum Lock (switch bar at right side). By
pressing/holding line selection button for 3 seconds to activate Lock Emitting mode.
Line will come out from laser but be aware at this mode the laser itself is out of
accuracy as the pendulum is locked.
Laser at this moment can be used for some “special” applications such as stairs
alignment since the pendulum is locking.
Line alarm when at Lock Emitting mode:
Laser line will flash for every 5 seconds to notice user that the laser is out of
accuracy.
Alarm Functions
Out Level Alarm:
When the pendulum is unlocked and the Cross Line Laser is within 3.5°of level, the
unit will be in automatic leveling range, in this situation no LED light will be on. When
the base of the unit locates outside the 3.5°leveling range the laser beam will flash
meanwhile an audibly warning will be sent out from Cross Line Laser.
Low Battery Alarm:
The battery LED will be on and keep flashing slowly when the working voltage is
lower than set data. At this situation the batteries are required to be recharged.
EQUIPMENT
laser unit
laser
’s target
multi-
tasking laser’s adapter (Nivel System CL-BR)
laser glasses
battery box + battery (4 x AA)
Li-ion battery
charger
transport case
user manual
