Utilities of Panel
-Pulse Mode: It can make the laser diode with PULSE(The pulse indicator will be
on). The laser line is able to be picked up by detector after this function is
activated.
-Line Selection: By pressing Line Selection can make a various change/collocation
of laser lines. The sequence of it is as below:
After switch on the laser, the H laser will be on.
Press Line Selection for one time, H line off, V line will on.
Press Line Selection for two times, Both H & V lines will be on simultaneously
Press Line Selection for three times, it will turn to the situation when the laser is
switched on. (H line emits)
For graphic illustration please refer to
figure 4
.