Nitto Seiko FF503H, Инструкция по эксплуатации

Страница: 15 / 61

Vibratory Track Screw Feeder FF/FM503H ver2
5
4. Preparation of operation
Before starting operation, make preparations as follows:
4.1. Connection of screw feeding hose
WARNING
When connecting the screw feeding hose
(1) Make sure that the air supply is shut down.
(2) Fix both ends securely.
If the screw feeding hose comes off with air
being supplied, a screw fed by compressed air
may jump off from an end of the hose, leading
to injuries (if it hits your eye, you may lose
your sight) or damage to equipment around the
machine. To ensure safety, do not look into the
screw feeding hose inadvertently or direct them
to anyone.
(3) Take care not to have your hand or finger
cut as a result of touching the edge of the
hose connector or the edge face of the screw
feeding hose.
Fig.7
After inserting the screw feeding hose over the hose connector, be sure to clamp the hose with a hose band
to prevent it from being disconnected.
If it is difficult to insert the hose, spread the end using a tapered tool.
4.2. Connection of connecting cable
WARNING
Always connect the earth cable led from the AC input power cable to the grounding
electrode.
Otherwise, fires, electric shocks, accidents, or faults may occur. Furthermore, we cannot
guarantee the performance of the product.
(Refer to
“For safe use”.)
WARNING
Do not apply a voltage out of specifications to this product.
Otherwise, fires, electric shocks, accidents, or malfunctions may occur.
WARNING
Always shut down the power source before providing or changing wiring.
Otherwise, electric shocks (including residual voltage), accidents, or malfunctions may
occur. Never touch any of the connecting terminals of the AC inlet installed on the back
panel for at least one minute after the power supply is shut off.
CAUTION
Always use the connecting cables specified by us. When handing them, pay extreme
attention.
Carefully lay connecting cables to prevent them from being caught by your foot or
pinched by a heavy object placed on it. DO NOT forcibly pull or twist them, but handle
them carefully. Use of cables that are not specified by us or damaged or disconnected
cables may cause fires, electric shocks, accidents, or malfunctions.