12
EN
6 How to Use
Peeling work
CAUTION
Do not press the Needle strongly against the working surface.
Excessive force could cause the Needle to bend or break, or damage the tool.
1
Hold the tool with your hand to start
2
Lightly apply force to support so that the Needle is not separated from the working surface
The Needle follows various uneven surfaces so that you can work quickly and reliably.
Replacing Needles
WARNING
Before replacing Needles, turn off the Throttle Lever and remove the Connecting Hose.
1
Press the bend portion of the Safety Band.
The Safety Band spreads, and the fluke with the
Lock Ring comes off.
2
While pushing the bent portion of the Safety
Band, loosen and remove the Lock Ring
Safety Band (fluke part)
Safety Band (bend portion)
3
Pull the bunch of Needles
The Needle Supporter can be taken out together
with the Needles.
When removing the Needle Supporter, the Throttle
Anvil may come out of the cylinder. Face the
smooth side of the Throttle Anvil toward the Needle
Supporter side and put it into the cylinder.
4
Replace the Needles
5
When the replacement is completed, assemble
in removal order in reverse.
Needle
Needle Supporter
Throttle Anvil
Be careful about the
orientation
Lock Ring
TQ15408-0̲JT-16̲en.indb 12
2017/11/21 8:38:13
