4
INSTRUCTIONS
FOR
THIS TOOL
About Your Tool
WARNING
●
Wear protective glasses and a dustproof mask.
Operation generates chips and dust particles, etc.
which may cause eye and / or respiratory injury:
Always use PPE (Personal Protective Equipment)
for eye and respiratory protection.
●
Wear vibration reducing and shock absorbing
gloves.
This is a power tool utilizing vibration. Wear vibration
reducing and shock absorbing gloves. When your
hands, fingers, arms, etc. feel discomfort during
operations, immediately stop your work. Long hour
operation should be prohibited, for it may cause
Vibration-induced disorder.
●
Always wear suitable hearing protection.
The tool generates loud noise. Always use ear plugs
for hearing protection. Take necessary measures to
comply with the local regulatory requirements and
laws with regard to noise level, or do better.
●
Do not operate tool at no Ioad.
Do not operate the tool at no load: It may not only
Cause damage to the tool but also may cause
Needles to fracture and fly out, possibly resulting in
unexpected accident.
1. USAGE
●
Remove slag and spatter from welding.
●
Perform shot peening after welding.
●
Remove rust, paint, cast sand from irregular metal
surface.
●
Peel off adhered concrete. Clean brick surfaces and
stone structures.
●
The tool is used for operations in the difficult-to-
operate areas where no other tool would be feasible :
in narrow difficult-to-reach areas, extremely irregular
surfaces, and grooves, cracks and other exterior
surfaces without containers, etc.
2. CHECK THE CONTENTS OF THE PACKAGE
Check the contents and make sure that the tool does
not have any damage which may have occurred
during transportation. The contents should correspond
to the list as follows. In case of damage/missing
parts, please contact the sales agent from whom you
purchased the tool.
AJC-16
Package Contents
Qty
Check
AJC-16
1set
O.D.3×180mm;(on tool)
3
O.D.3×180mm
3
Bushing R3/8×NPT3/8
1
Hose Nipple R3/8×3/8
1
Instruction Manual
1
Declaration of Conformity
1
Caution for Use
1
JC-16
Package Contents
Qty
Check
JC-16
1set
Needle O.D.2×150mm;(on tool)
29
Needle O.D.2×150mm
29
Bushing R3/8×NPT3/8
1
Hose Nipple R3/8×3/8
1
Instruction Manual
1
Declaration of Conformity
1
Caution for Use
1
JT-20
Package Contents
Qty
Check
JT-20
1set
Needle O.D.3×180mm;(on tool)
12
Needle O.D.3×180mm
12
Bushing R3/8×NPT3/8
1
Hose Nipple R3/8×3/8
1
Instruction Manual
1
Declaration of Conformity
1
Caution for Use
1
JEX-20
Package Contents
Qty
Check
JEX-20
1set
Needle O.D.3×180mm;(on tool)
12
Needle O.D.3×180mm
12
Bushing R3/8×NPT3/8
1
Hose Nipple R3/8×3/8
1
Instruction Manual
1
Declaration of Conformity
1
Caution for Use
1
JEX-24
Package Contents
Qty
Check
JEX-24
1set
Needle O.D.3×180mm;(on tool)
23
Hex. Socket Screw Key 6
1
Bushing R3/8×NPT3/8
1
Hose Nipple R3/8×3/8
1
Instruction Manual
1
Declaration of Conformity
1
Caution for Use
1
Содержание JET CHISEL AJC-16
Страница 17: ......
