FUNCTION INTRODUCTION
1
、
Here below are the DEFAULT buttons (the ones you can assign to other functions):
□
//1/X,
○
/3/B,
△
/4/Y, X/2/A, L1/5/LB, L2/7/LT, R1/6/RB, R2/8/RT
2
、
Here below are the PROGRAMMABLE buttons (the ones you can setup):
L-wing (
□
/1/LT), R-wing (X/2/RT), Accelerator pedal (X/2/RT), Brake pedal
(
□
/1/LT), L3/11/SL, R3/12/SR, Gear-shift (L2/7/LB,R2/8/RB)
1
、
Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until
the green LED turns on
2
、
Press the PROGRAMMABLE button until the green LED starts blinking
3
、
Press the DEFAULT button until the green LED turns off
· PROGRAM SETUP
· CLEAR SINGLE PROGRAM
1
、
Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until
the green LED turns on
2
、
Press the programmed button until the green LED starts blinking
3
、
Press the programmed button until the green LED turns off
· CLEAR ALL PROGRAMS
1
、
Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until the
green LED turns on
2
、
Press & hold “OPTIONS/10/Menu” for 4 seconds until the green LED turns off
All the programmed buttons are cleared
1
、
Press & hold “SHARE/9/View” + “Option/10/Menu” for 3 seconds until the
green LED turns on
2
、
Press D-PAD LEFT until the green LED turns off
The pedals are programmed as Y-AXIS
· PROGRAM PEDALS AS Y-AXIS
PROGRAM FUNCTIONS
· INTRODUCTION
You can assign to some buttons (PROGRAMMABLE) functions of other buttons (DEFAULT)
