LED
LITHIUM ION
MiNewt Mini 350 – USB
MiNewt Mini 350 – USB Plus
Discover the Night!
Thank you for choosing the MiNewt Mini 350 - USB™ from NiteRider, the leading innovator in technical
lighting systems. The MiNewt Mini 350 - USB™ combines a high-powered white LED headlamp and a
Power Module containing light control, charging and safety circuits as well as the rechargeable
Lithium Ion battery.
To get the most from your NiteRider light, we urge you to familiarize yourself with the following safety
and operating instructions.
Riding at Night
While the MiNewt Mini 350 - USB™ will improve your control and enjoyment of night riding, please
remember that cycling at night is an inherently dangerous activity. In addition to using your lighting
system properly and riding with extreme caution, NiteRider urges you to:
• Never ride alone
• Always let someone know where you are going
• Wear a helmet and reflective clothing
• Carry an auxiliary light and emergency supplies
Protecting Your Investment
When not in use, always disconnect the headlamp from the power module. To unplug, grasp the
connector, not the cable. Properly charge your batteries to maximize their lifespan. Be sure to use
only the supplied AC Adapter, otherwise damage to the power module circuitry could occur. The
MiNewt Mini 350 - USB™ will perform in wet weather conditions, but submerging it in water will damage
the system. If you need a submersible light, NiteRider manufactures industrial-grade dive light systems.
For information, contact NiteRider Dive Lights at 858.268.3850 or visit
www.niteriderdive.com
.
Support
If you experience difficulties during product installation or operation, NiteRider provides free
telephone support on weekdays from 8:00 AM to 4:30 PM (Pacific Time) at 800.466.8366, ext. 4. You
may also e-mail us at
.
Warranty
NiteRider stands behind its products with the following MiNewt Mini 350 - USB™ warranties:
• Lifetime warranty on all mechanical components
• 2 years on the headlamp, power module (excluding degradation of the battery cells) and AC Adapter
• 180 days on rechargeable batteries
To repair or replace your product while under warranty, return it (postage prepaid and insured with
original sales receipt) to the address below. Out-of-warranty repair service is also available. For
complete warranty information, please visit our website at
www.niterider.com
.
Parts List and Identification
Please verify the contents of your MiNewt Mini 350 - USB™ system:
A. “O-Ring” Handlebar Mounting Straps
B. Power Module
C. MiNewt Mini 350 - USB™ Headlamp
D. AC Adapter
E. USB Cable
F. Velcro Strap
The MiNewt Mini 350 - USB Plus™includes:
A. “O-Ring” Handlebar Mounting Straps
B. Power Module
C. MiNewt Mini 350 - USB™ Headlamp
D. AC Adapter
E. USB Cable
F. Velcro Strap
G. Helmet Mount
H. 36” Extension Cable
H
Mounting the Headlamp
Depending on the size of your bike’s handlebars, use one of the three “O-Ring” style mounting straps
to attach the headlamp/handlebar mount assembly. Follow the steps below.
1. Loosen the screw holding the mount assembly to the headlamp.
2. Hold the headlamp and twist the mount assembly, exposing the slot.
3. Place the desired O-ring mounting strap into the slot and twist the mount assembly back in its
original position. The mounting strap is now secure.
4. Before tightening the screw, align the headlamp. Place the headlamp/mounting assembly on the
handlebar and change alignment angle by twisting.
5. When properly aligned, tighten the screw.
6. Place the headlamp/mounting assembly on the handlebar. Pull/stretch the mounting strap under
the handlebar, towards the back and loop it over and into the back slot on the mounting assembly.
If you have difficulty getting the mounting strap into the back slot see the TIP below.
TIP
: The 2 slots on the mounting assembly are different sizes.
The larger slot opening should face the back of the bike,
giving more room for attaching the mounting strap. The
smaller slot opening should face forward, reducing the
chance of dropping the mounting strap.
F
B
G
E
A
LARGER SLOT
D
C
