background image

Federal Communication Commission Compliance
Lumina™ Max 
- FCC ID: 2AXZQ-24632 

This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one of the 

following measures: 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that 

   to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: 

TO ASSURE CONTINUED COMPLIANCE, ANY CHANGES OR 

MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY 

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY 

TO OPERATE THIS EQUIPMENT. (EXAMPLE - USE ONLY SHIELDED 

INTERFACE CABLES WHEN CONNECTING TO COMPUTER 

OR PERIPHERAL DEVICES).

FCC Radiation Exposure Statement 

This equipment complies with FCC RF radiation exposure limits set forth 

for an uncontrolled environment. This equipment should be installed and 

operated with a minimum distance of 20 centimeters between the radiator 

and your body.

This transmitter must not be co-located or operating in conjunction with 

any other antenna or transmitter.

The antennas used for this transmitter must be installed to provide a 

separation distance of at least 20 cm from all persons and must not be 

co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) This device 

must accept any interference received, including interference that may 

cause undesired operation.

Industry Canada Compliance
Lumina

 Max - (P/N 24632), IC: 26701-24632  

This device complies with Industry Canada licence-exempt RSS standard. 

Operation is subject to the following two conditions: (1) this device may 

not cause interference, and (2) this device must accept any interference, 

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables 

aux appareils radio exempts de licence. L’exploitation est autorisée aux deux 

conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) 

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, 

même si le brouillage est susceptible d’en compromettre le fonctionnement.

IC Radiation Exposure Statement 

This equipment complies with IC RSS-102 radiation exposure limit set 

forth for an uncontrolled environment. This equipment should be 

installed and operated with minimum distance 20cm between 

the radiator and your body.

Cet équipement est conforme aux CNR-102 d’Industrie Canada. Cet 

équipement doit êtreinstallé et utilisé avec une distance minimale de 20 

centimètres entre le radiateur et votrecorps. Cet émetteur ne doit pas être 

co-localisées ou opérant en conjonction avec autreantenne ou émetteur. 

Les antennes utilisées pour cet émetteur doivent être installés etfournir une 

distance de séparation d’au moins 20 centimètre de toute personne et doit 

pas être co-située ni fonctionner en conjonction avec une autre antenne ou 

émetteur.

VerifiR Integrated NFC Technology 

The Lumina™ Max is equipped with integratred NFC Technology.

 

Tap your mobile device on the VerifiR Logo located on the top 

of the light to launch the NiteRider® VerifiR experience.

Within the NiteRider® VerifiR experience you can quickly and easily: 

• Learn how to unlock/lock your light 

• Register your product 

• Access How to / User Guides 

• Report your light lost or stolen

Отзывы: