EN © 2022 NITEO TOOLS. All rights reserved.
Battery compressor
NITEO TOOLS
23
To charge your device, connect the micro USB plug of the supplied cable to
the charging socket on the bottom part of the device. Connect the other end
of the cable to a powered USB adapter or, for example, a powerbank. (none of
these power supply devices are included), which guarantee a power supply of
5 V
⎓
1 A or higher at the output. When charging starts, the LED charging diode
lights up red. When charging is complete, the LED switches blue. Once
charged disconnect USB from the device and from the power source.
The DC 5.5x2.1 mm connector is not intended for charging the device
battery. It can be used to power the compressor, for example, from the car
lighter socket. The suitable cable is not included.
PREPARING THE COMPRESSOR FOR OPERATION
Regardless of the intended application, the Schrader valve hose end should
always be connected to the compressor. Other tips are installed in this tip.
Use of the tips:
•
Schrader valve adapter - for inflating car, motorbike, bicycle wheels
and for use with other products equipped with a Schrader valve
•
Ball tip - for pumping balls
•
5 mm universal tip - for pumping products with 5 mm diameter valves
•
8 mm universal tip - for pumping products with 8 mm diameter valves
Insert the ball end and the universal end into the hole in the Schrader valve
adapter and lower the lever on the back of the adapter. The lowered lever locks
the attached tip. To change or remove the tip the lever must be lifted.
Do not expose mounting elements that can be frequently connected or
disconnected (Hose end for Schrader valves) to dirt. Soiling can cause
problems during assembly and disassembly, as well as failure to maintain the
tightness of the connected elements.
COMMISSIONING
The operator should wear hearing protection and safety glasses when
using the device. Self -protection measures are not included.
Before starting work, check the technical condition of the device and its
accessories, and check them for operational safety. If the device is not in
