Product Warranty and Return Information
Return Policy
A. All returns for warranty, repair, credit or any other reason must be pre-authorized. A return mer-
chandise authorization (RMA) form must be requested from the NITEK Customer Service De-
partment. The form, which will be emailed to the customer, must be filed out completely and
emailed back to the sender at NITEK for approval. An RMA number will be assigned if the re-
quest is approved. In any event, the customer will be notified by NITEK customer service of the
outcome. All approved returns must be shipped freight prepaid, insured and properly packaged.
A copy of the approved RMA form must be enclosed in the shipping container with the goods
being returned and the RMA number must be marked in a visible area on the exterior of the
container.
B.
Credit Returns must have been purchased within the last 30 days of the date of the receipt
of the equipment at NITEK. Credit returns must be current products listed on the NITEK
published price list, in effect at the time of the return and must be in new and saleable con-
dition, with all factory packaging. All Credit returns are subject to a restocking charge of up
to 40%. Additional restocking and/or refurbishing charges may be assessed upon inspec-
tion. If it is determined by NITEK that the returned equipment does not meet these condi-
tions, a credit will not be issued.
Lifetime Limited Warranty
Network Extender Products
NITEK warrants the original consumer purchaser that the Network Extender products that it sells
will be free from defects in material and workmanship. If any such product proves defective by our
inspection, after sale to the original consumer purchaser, NITEK, at its option, will either repair the
defective product without charge for parts and labor or will provide a replacement in exchange for
the defective product.
In order to obtain service under this warranty, the customer must notify NITEK of the defect and
shall be responsible for packaging and shipping the defective product to the service location des-
ignated by NITEK with shipping charges prepaid. NITEK shall pay for the return of the product to
the purchaser if the shipment is to a location within the U.S.A. The purchaser shall be responsible
for paying all shipping charges, duties and taxes if the product is returned from a location outside
the U.S.A.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper
or inadequate maintenance or care, or to any product which shall have been repaired or altered
outside our plant in any way, or which has been operated in a manner exceeding its specifica-
tions, or which has had the serial number removed. NITEK shall not be obligated to furnish service
under this warranty: a) to repair damage resulting from attempts by personnel other than NITEK
representatives to repair or service the product; b) to repair damage resulting from improper use
or connection to incompatible equipment; or c) to service a product that has been modified or inte-
grated with other products when the effect of such modification or integration increases the time or
difficulty of servicing the product.
This warranty is given by NITEK with respect to the Network Extender products in lieu of any other
warranties, express or implied. NITEK disclaims any implied warranties of merchantability or fit-
ness for a particular purpose. NITEK’s responsibility to repair or replace a defective product is the
sole exclusive remedy provided to the purchaser for breach of this warranty. NITEK will not be
liable for any indirect, incidental or consequential damages irrespective of whether NITEK has ad-
vance notice of the possibility of such damages.
