®
User Manual
Features
• CREE XP-G (R5) LED
• Maximum output of up to 180 lumens
• High efficiency circuit enables maximum runtime of up to 80 hours
• 5 brightness levels
• Momentary push-on strobe and SOS modes
• Dual electronic switches ensure very easy user interface
• Secondary red light mode (0.2 lumens)
• Power indicator light also serves as battery voltage indicator (accurate to
0.1V)
• Power indicator light serves as standby indicator light when powered down
• Broad voltage circuit accepts both rechargeable and non-rechargeable
Lithium batteries
• Toughened ultra-clear mineral glass with dual-side anti-reflective coating
• Elaborate alloy reflector is purpose-designed for exceptionally long throw
• Constructed from aero grade aluminum alloy
• HAIII military grade hard-anodized
• Stainless steel bezel retaining ring protects core components from damage
• Detachable two-way anti-rolling clip
• Waterproof in accordance with IPX-8 (2 meters submersible)
• Tail stand function
Dimensions
Length: 81mm
Head Diameter: 25.4mm
Tail Diameter: 19mm
Weight: 47.5g (without battery)
Accessories
Quality holster, lanyard, spare O-ring
Battery Options
WARNING
Always ensure battery is inserted with the positive (+) end pointing
toward the flashlight head. If incorrectly installed, the flashlight will not
work.
Switching ON/OFF
To switch ON: Press the “ON/OFF” button once to turn the light on.
To switch OFF: Press the “ON/OFF” button once again to turn the light
off.
Note:
When EA1 is off, the power indicator (red light) will flash once
every 3 seconds to act as a locator. In this mode, the EA1 consumes a
very little amount of current (about 0.15mA) to maintain working of the
built-in MCU and power indicator. In this mode, one AA battery will last
about 2 years.
Brightness Selection
With the flashlight switched-on, each time you press the “MODE” button,
it will go through the different preset brightness levels as follows:
ultra-low mode→low mode→medium mode→high mode then repeat. In
this mode, the flashlight has a memory function. It can memorize the
selected brightness after turning the light off. The next time turning on
the light, it automatically resumes to the previously selected mode.
Entering Turbo Mode
With the flashlight switched on, press the “MODE” button for more than 1
Second, EA1 will enter Turbo mode. Press the MODE button again, the
flashlight will retreat from turbo brightness and resume to previous
brightness. In Turbo mode EA1 circuit will deliver maximum current to
make brightness as high as possible.
Thanks for purchasing NITECORE!
NOTICE
The stated data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1, using one high quality AA
Ni-Mh rechargeable battery (1.2V, 2500mAH) under laboratory
conditions. The data may vary in real-world use due to different battery
usage or environmental conditions.
Operation instructions
Battery installation
1. Unscrew (counterclockwise) and remove the tail cap.
2. Insert one AA or other compatible battery with the positive pole of the
battery pointing toward the head.
3. Replace the tail cap and fasten tightly.
SIZE
Nominal voltage
Compatible
Primary AA battery
AA
1.5V
Y
(Recommended)
Rechargeable AA battery
AA
1.2V
Y
(Recommended)
Primary AA Lithium battery
L91
1.5V
Y
(Recommended)
Primary LiFePO4 battery
14500
3.2V
Y
Rechargeable Li-ion battery
14500
3.7V
Y
Note:
When EA1 is driven by primary LiFePO4 battery or rechargeable Li-ion battery, it can
result in one of the below situations:
1. EA1 brightness level is greatly increased
2. EA1 circuit can not accurately detect the battery voltage
Brightness & Runtime
Note:
1. After 3 minutes working in Turbo mode, the flashlight will automatically
restore to the previously selected brightness level to safeguard against
overheating.
2. While activating Turbo mode, the brightness level increases about 80
lumens. Due to adaptability of human eyes, this brightness increase
may not be apparent within close range observation. In real-world
usage, mode can throw to a longer range.
Entering Strobe and SOS Mode
With the light switched off, press the “ON/OFF” button for more than 1
second to enter Strobe mode. In strobe mode, press any button (ON/OFF
or MODE) to exit strobe and switch the light off.
With the light switched off, press the “MODE” button for more than 1
second to enter SOS mode. In SOS mode, press any button (ON/OFF or
MODE) to switch off the light and quit SOS mode.
Red Light Mode
With the light switched off, press the “MODE” button to enter red light
mode. In this mode, the power indicator will continuously emit red light
(0.2 lumens). Press the “MODE” button once again to quit the red light
mode.
Lockout Mode
With the light switched on, press the ON/OFF button for over 1 second to
enter lockout mode. In lockout mode, EA1 power source system will shut
down most of the circuit components to reduce its power consumption.
The MCU only consumes small amount of power to maintain its work. The
red light indicator also switches off to save energy. Under this mode, the
maximum consuming current is about 0.1mA, which ensures one AA
battery can last for around 3 years. In lockout mode, the 2 buttons on
EA1 will not work, which can prevent the light from being turned on
accidentally.
To exit lockout mode, simply press the ON/OFF button for more than 1
second.
Note:
When entering lockout mode, the red light indicator light will
continuously flash to notify you of battery voltage. Please refer to the
“Power Indication” section below.
ALL-ROUND Flashlight Expert
EA1
Power Indication
With the light switched on, and when the battery power has been
consumed by about 50%, the power indicator light (on the control panel)
will flash once every 6 seconds as a reminder of battery capacity.
When the battery power is almost depleted, the power indicator light will
flash 3 times every 3 seconds to indicate low battery capacity.
When entering lockout mode, the power indicator will automatically detect
and notify you of battery voltage (accurate to ±0.1V) with a series of
flashes. For example, if the battery voltage is 4.2V, the indicator will flash
4 times, followed by a one second pause and then another 2 flashes.
Battery replacement
If battery level is low, the red power indicator light will flash three times
every 3 seconds. If the power level is critically low, the light will become
very dim and unresponsive to brightness adjustment. A replacement
battery is required at this time.
Maintenance
Every 6 months, the threads should be wiped with a clean cloth followed
by a thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective
products can be exchanged for replacement though a local
distributor/dealer within the 14 days of purchase. After 14 days, all
defective / malfunctioning NITECORE® products will be repaired free of
charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts. The
warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or visit our official website:
www.NITECORE.com
—
2
h
20
min
17
h
5
h
80
h
TURBO
HIGH
MID
LOW
MICRO
LUMENS
100
LUMENS
180
LUMENS
40
LUMENS
12
LUMENS
2
3000cd
(Peak Beam Intensity)
109m
(Beam Distance)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
