Nitec KWIK-GIG, Руководство пользователя

Страница: 8 / 10

RECEIVING TRANSMITTING
To enable wireless DMX operation via the optional UFI wi-fi transceiver:
1) Set the KWIK-GIG starting DMX address
2) Set the UFI sending/receiving channel
3) Attach the UFI to the KWIK-GIG USB port
4) Use Dipswitch 5 to select UFI send or receive mode.
UFI OPERATION
8
MASTER/SLAVE OPERATION (via DMX cable)
When multiple KWIG-GIG units are used together, Master/Slave mode enables the
assignment of one master unit and multiple slave units. The master unit can be operated
in stand-alone mode or by the wireless footswitch. The slave units should all be set to slave
mode.
Note: Slave units should be configured and connected before linking to master unit
Setup as below:
SLAVE UNITS:
Press MENU button until 3-CH or 15CH is displayed
Press ENTER
Set DMX address to d 1
Connect DMX cable from master unit to DMX In connector
Link following slave units in similar cable configuration
MASTER UNIT:
Set to Auto or Sound-Active mode
Link to slave units, beginning from the master DMX Out connector
13