SETTING THE TROLLEY ONTO THE BEAM
PROHIBITED
!
• The trolley must be installed onto the trolley
beam only by qualified people with the neces-
sary knowledge.
DANGER
lnserting an assembled trolley from the end of the trolley beam:
• Remove the Stoppers at the end of the trolley beam, and insert the trolley.
• Replace and positively secure the stoppers.
1.
2.
3.
How to install the trolley when the assembled trolley can not be inserted from
the end of the trolley beam:
• Remove the Hexagonal nuts from the Stay bolts.
• Dismount the Plain-side plate.
• Set the Geared wheels on to the tread section of the trolley beam.
• While holding the Geared wheels in position, insert the Plain-side plate so that the Plain
wheels will be in position on the tread section of the trolley beam.
• Firmly tighten the Hexagonal nuts of the Plain-side plate side of the Stay bolts.
When the trolley beam is curved, install the trolley so that the geared wheels
are on the outside of the curve.
Motorized trolley
Geared trolley
Stopper
Plain-side plate
Stay bolt
Motor
Gear wheel
Hand wheel
Gear wheel
Trolley beam
Trolley beam
Gear-side plate
Gear wheel
Gear wheel on the tread section
of the trolley beam.
Appearance of trolley correctly
installed on to trolley beam.
10
