Chapter 2. Hardware Setup
13
Single Level Installation
In a single level installation, there are no additional switches cascaded from the
first unit. To set up a single level installation do the following:
1. Ground the NS-KVMUV8 / NS-KVMUV16 and make sure that power
has been turned off to all the computers you will be connecting up.
2. Using the console cable provided, connect a keyboard, mouse, and
monitor to the NS-KVMUV8 / NS-KVMUV16 console port. Refer to the
Cable Connection Diagrams
on the following page.
3. Use KVM cable sets* (as described in the
Cables
section on page 3), to
connect any available KVM port to the keyboard, video and mouse ports
of the computer you are installing. Refer to the
KVM Cable Installation
Diagrams
on the following page.
4. Plug the power adapter cable into the NS-KVMUV8 / NS-KVMUV16
power jack, then plug the power adapter into an AC power source.
5. Turn on the power to the computers.
Single Level Installation Diagram
Note:
The numbers in the diagram correspond to the numbered steps above.
* Contact your KVM switch dealer for ordering information.
2
3
1
5
4
