Professional power amplifier
MA-1200 G2
B R I D G E
P E A K
S I G N A L
ON
POWER
OFF
CH-1
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
CH-2
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-24
3
Intro
INTRODUCTION
Nissindo is proud to introduce a high power amplifier MA
Series to the North America market. They are designed by
the Nissindo engineering team with the advanced audio
technology. One of the distinguished features of this new
amplifier series is that they produce crystal clear vocal sound
and music for singing as compared to other brands in the
market.
If you want a high-performing, precise clarity, low
temperature, reliable, and portable power amplifier, you may
look into our MA Series. Coming in three models, the
MA-1200 G2 (1,000 watts), MA-1330 (2,000 watts) and
MA-2000 (3,200 watts), the MA Series power amplifiers
give you high power (which is as high as 3,200 watts),
compact size 2-space, and efficiency for your application.
They feature Nissindo’s latest Auto Temperature and Loads
Compensated Impedance and Supply Control Technology™
circuitry for clean, undistorted sound with the ultimate circuit
protection needed by amps which often get pushed to the
limit.
The Nissindo engineering team has brought the power and
portability of high power amplifier into the consumer market.
The compact 2U design of the KTV can easily be mounted
onto the versatility of the compact DJ rack system or any
Karaoke Rental Gear; allowing many restaurants and bars
venue to have sound quality on rack or on the go for
maximum power and portability.
To expand into high power (as high as 3,200 watts), the
MA series would go with either a pre-amplifier or a mixer. A
normal mixing amplifier can produce the power from 200
watts to 800 watts only.
The Nissindo MA Series has elevates the audience’s
experience by combining the power of professional precision
crossovers and acoustic correction for high definition clarity
and performance. While the MA Series can thrust a huge
amount of bass that the audiences can literally feels the
pressures, it does not create the "muddy" overall sound like
other systems, even for those directly in front of the speaker.
Instead, it delivers the vocal and music in a very precise,
focused, high-definition quality sound to its very limits,
providing clearer, and more accurate sound to the entire
audience; even when used in highly reverberant huge area
like churches and banquet halls.
Features
SYSTEM FEATURES
MA Series is equipped with the following
distinguished features:
Models:
MA-1200 G2
(Generation 2)
MA-1330
MA-2000
• Housed in a rugged, all-steel 2U chassis
• Rear panel selection switch for Stereo, Parallel and Bridged
modes, including Low-cut filter, Ground lift and Limiter
switches
• Operates within 8 ohms and 4 ohms loads
• Innovative heatsink with front to back air flow for efficient
cooling
• Variable fan speed is automatically adjusted by
temperature
• Electronically balanced XLR inputs
• Touch proof binding post and Speakon outputs
• Precision indented level controls, power switch
• Bridge, Peak and Signal LEDs indicators for each channel
• Amplifier protection includes short circuit, excessive
temperature, and DC on outputs
SPECIAL FEATURE DESCRIPTIONS
AC-POWER SWITCH
Before applying power, check all connections and turn
down the gain controls. The "soft start" sequence starts with
the POWER indicator LED at half brightness. A couple
seconds later the fan starts and the amplifier cycles through
one second of protective muting, indicated by the CLIP LEDs
glowing bright red. The POWER indicator then changes to
full brightness and the amplifier is ready.
The power cord has a big beefy cord built in. Plug the
power cord into a 3-prong outlet that is capable of
delivering 110~120V at 15 amps.
ON
POWER
OFF
