Shooting Di700 automatically
Canon cameras
Nikon cameras
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
Set Di700 to the camera’s hotshoe and press the on/off switch to
power on.
Rotate the dial to “A” mode then press the Set button.
Di700 is now set for the camera’s automatic flash control system.
Press the shutter button of your camera halfway to focus the subject.
Press the on/ off switch once again to lock this condition on your
flash. (Press it again to release the lock)
Take the picture. Di700 is fired and the result is immediately shown
on the camera’s LCD display.
When you change the focal length, the power zoom flash head of
Di700 responds without delay and immediately sets its position to
match the lens focal length you selected.
The flash illumination coverage of Di700 responds to the lens focal
length of 24mm to 200mm (35mm film camera standard).
In all of the camera's shooting modes listed above, Di700 will fully
work in TTL (ETTL, ETTL-II for Canon and i-TTL for Nikon)
automatic-flash system.
Shutter speed, aperture and flash mark ( ) are indicated in
camera’s view finder.
8
