Nissin Digital MF18, Руководство пользователя

Страница: 10 / 31

Basic Operation
Expansion of the Flash Head
Removing MF18 from the Camera
Turn on the flash unit
• Press the on/off switch. Main screen appears.
• The pilot lamp blinks red showing the unit is charging.
• In a few seconds, the pilot lamp turns green.
• The display screen automatically turns off in about 30 seconds after the setting job is
terminated.
• For a test-flash, press the pilot lamp.
• To turn off the flash unit manually, press the on/off switch and hold it for 2 seconds.
Loosen the lock ring and slide the mounting foot of MF18 off the hotshoe of the
camera. Make sure to turn the lock ring all the way to completely clear the lock pin
off the hooking slot on the hotshoe. Press the release button on the flash head and
remove. Screw the adapter ring off the front thread of the lens.
Press the expansion buttons on the sides of
flash head.
The flash head is expanded. It is possible to
expand one side if necessary.
1.
2.
After the flash head has been attached, should you experience vignetting due to the
flash covering a part of the lens, it is recommended that the flash ring be expanded to
its wide position. This should eliminate the dark corners on the image. (It is also
depending on the angle of view).
Remark: This Macro flash is preferable to apply on macro lens. For zoom lens, please
adjust the suitable position to prevent the dark corners.
To close the expansion, push it lightly back to
the original position.
3.
9