Nissin Digital Di700A, Инструкция по эксплуатации

Страница: 9 / 24

Shooting Di700A automatically
Set Di700A to the camera’s hotshoe and press the on/off switch to
power on.
Rotate the dial to “A” mode then press the Set button.
Di700A is now set for the camera’s automatic flash control system.
Press the shutter button of your camera halfway to focus the subject.
Press the on/ off switch once again to lock this condition on your
flash. (Press it again to release the lock)
Take the picture. Di700A is fired and the result is immediately
shown on the camera’s LCD display.
When you change the focal length, the power zoom flash head of
Di700A responds without delay and immediately sets its position to
match the lens focal length you selected.
The flash illumination coverage of Di700A responds to the lens focal
length of 24mm to 200mm (16mm film camera standard).
In all of the camera's shooting modes listed above, Di700A will fully
work in TTL automatic-flash system.
Shutter speed, aperture and flash mark ( ) are indicated in cam-
era’s view finder.
(Program AE), (Aperture priority AE),
(Shutter priority AE) or (Manual Exposure);
S
8