© 2015 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
15
Menu:
Pressing the key
[
OK
]
opens the setting menu of the remote control. Several submenus can be
selected and confirmed here with the cursor keys.
Information
Shows the actual status of the software and fault reports.
Language
The following languages are available for selection: German; English; French; Spanish.
Select the language with the cursor keys
[
]
,
[
]
and confirm with
[
OK
]
.
Display
Brightness
Adjust the brightness of the display with the cursor keys
[
]
,
[
]
resp.
[
]
,
[
]
and
confirm with
[
OK
]
.
Lighting
The keyboard lighting can be switched on/off or its brightness can be changed.
Mode
The display mode can be switched from simple to extended.
Settings
Function (pin: 9999)
·
Rampe Direct
·
LED-Matrix/ MultiSign
·
Light Arrow
·
Triangle
·
Sign 615
·
Prism Sign
Dimmer
Automatic: The brightness of the lamps is regulated automatically.
Manual: The brightness of the lamps can be regulated manually (10-100%).
Speed selection (only possible at function: LED-Matrix/ MultiSign)
The keys
[
F1
]
,
[
F2
]
,
[
]
,
[
]
,
[
]
,
[
X
]
can be assigned with a speed selection
function. Therefore mark the requested key with cursor
[
]
,
[
]
and confirm with
[
OK
]
. Select with cursor key
[
]
,
[
]
the requested picture from the display and
confirm with
[
OK
]
. The picture number of the speed selection key appears next to the
corresponding key. The corresponding picture number appears behind the key. Select
picture 0 to deactivate the speed selection. For speed selection press the key until the
symbolic clock has run down (approx. 1 sec). At function Rampe Direct, Light Arrow,
Triangle, Sign 615 and Prism Sign the speed selection keys are preset automatically!
Restore parameter (PIN1111)
Parameters are reset to factory settings.
Radio ID
not necessary.
Parameter
Factory setting (PIN-number requested).
End
Confirm with
[
OK
]
to quit the menu.
