5
EN
• Do not use the oven cavity for storage purposes.
• The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
• Nisbets Essentials recommend that this appliance should
be periodically tested (at least annually) by a Competent
Person. Testing should include, but not be limited to: Visual
Inspection, Polarity Test, Earth Continuity, Insulation
Continuity and Functional Testing.
• Nisbets Essentials recommend that this product is
connected to a circuit protected by an appropriate RCD
(Residual Current Device).
Pack Contents
The following is included:
• Microwave
• Grill rack
• Instruction manual
Nisbets Essentials prides itself on quality and service, ensuring that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Nisbets Essentials dealer immediately.
Installation
1. Remove all packaging materials. Make sure that all protective plastic film and coatings are thoroughly
removed from all surfaces.
Warning: Check for any of the following damage that may have occurred:
• Misaligned or bent door, damaged door seals/sealing surface, broken/loose door hinges, dents in the
oven interior.
• DO NOT operate the oven if any damage is found. Call a Nisbets Essentials agent or qualified
Technician.
2. Position the oven on a flat, stable and heat-resistant surface. For
sufficient ventilation, allow a minimum of 20cm of space above
the oven, 10cm at the back and sides.
Note: Do not cover or block any openings on the appliance, or
remove the feet.
3. Place the oven as far away from radios and TV as possible as
operation of the appliance may cause interference to your radio
or TV reception.
20cm
10cm
10cm
10cm
DJ610_EN_A5_v1_20220419.indb 5
DJ610_EN_A5_v1_20220419.indb 5
2022/4/19 09:31
2022/4/19 09:31
