30
Brakes inspection
You should check the braking system for breakages and leaks before riding.
1. Depress the brake lever several times to determine whether there is a leak.
2. Check the wear condition of the brake pads.
SERVICE AND MAINTENANCE
NOTE:
-‐ Before riding with newly installed brake pads, first depress the brake lever several times to extend the brake
pad fully and restore normal resistance, making the fluid circulation stable.
!
ATTENTION:
-‐ The brake fluid must be handled with care, as it can damage the paint surfaces and plastic parts.
-‐ When refilling the brake fluid, make sure the reservoir is set level otherwise fluid will spill out when you
remove the reservoir cap.
-‐ Only use DOT3 or DOT4 brake fluid from a sealed container.
-‐ Do not mix pollutants such as oil, mud or water with the brake fluid in the reservoir.
-‐ Inspect that the fluid level is above the MIN mark, when resting the motorcycle in a vertical position.
-‐ The brake fluid can cause soreness and inflammation to the skin. Do not allow it to come into contact with
your skin and eyes. If contact is made with the skin, wash it thoroughly with water. If contact is made with the
eyes, wash out with plenty of water and consult a doctor immediately.
-‐ Do not mix different types of brake fluid.
Содержание Neon
Страница 1: ... Owner s manual Neon 50 Nipponia S A OWB001 EN ...
Страница 38: ... 37 WIRING DIAGRAM ...