Nipponia E-viball, Руководство пользователя

Страница: 27 / 58

OPERATION AND DRIVING INSTRUCTIONS EN
26
BATTERY
This model can carry two 61.2V 28.6AH Li-ion batteries. Only one battery is provided with your purchase of the scooter version e-
Viball 1500W. An optional battery can be used for extended range. You may also purchase the e-Viball 3000W version with two
batteries.
Battery can be used at -10°C up to 45°C ambient temperature.
The operating capacity of the battery varies under low temperature. The specific reference attenuation degree is 70% at -10
o
C, 85%
at 0
o
C , 100% at 25
o
C.
When using only one battery, make sure that the battery is positioned at the right side of the vehicle and connected to the cable at
the right side. Before connecting the cable, first turn the main switch to OFF position and then turn-off the power switch.
The battery can be charged in two ways:
1. Charging with the battery removed
Charge the battery directly by removing it from its compartment. Connect the charger to the battery and connect the charger
to a 220V power outlet.
2. On-board charging
Plug the scooter directly, without removing the battery, by connecting the charger to the socket at the front of the seat. Charge the
battery (ies) as follows:
1. Make sure that the battery that needs to be charged is positioned correctly, according to the instructions above.
2. Connect the vehicle’s cable plug to the battery.
3. Insert the power cord of the charger into the charging socket.
CAUTION