①
Insert the key and turn leftwards, Open the saddle,
open the cap to connect the battery cable, Turn on
the
power switch
.
②
Put on the helmet, and retract the electronic side.
stand.
③
Insert the key and turn rightwards,
“
Powered
”
state
is started, the Instrument is opened, and the
“
READY
”
light is ON, scooter is ready for driving now.
④
Press the "P" button with three (3) seconds, to exit the
Parking state, and the
“
P
”
indicator goes off, then you
can start driving. Gently turn the handlebar to ride on
the road.
TIPS:
Before riding, make sure the electronic side stand retracted and
rotate the handlebar to ensure that the handlebar lock is closed.
If the Parking button is pressed when riding, the bike will be dis-
energized. So DO NOT press it when riding for avoiding danger
caused by the sudden loss of power.
If the electronic side stand is extended when riding, the bike will
be dis-energized. So DO NOT extend the electronic side stand when
riding for avoiding danger caused by the sudden loss of power.
The scooter must be fully stopped before starting. In case of
abnormality during riding, please ride carefully or push it to a
safe place. DO NOT try restarting the bike during riding or on the
lane so as to avoid danger.
Make sure to check the following items before riding, which will guarantee your safety on the road.
Routine Cleaning and Maintenance
In order to protect the surface coating, please clean the vehicle regularly and check if there will be damage, wear and battery
leakage of the vehicle.
Please use clean water and neutral detergent to clean it, and use soft cloths and sponges to clean the surface.
It is prohibited to use metal brushes, sandpaper or the like to clean it, in order not to scratch the parts surface. After cleaning,
dry it with soft cloths.
When washing, it is not allowed to spray water directly to the brake drum, motor and front and rear axles in order to prevent
water from affecting the performance and life of related parts. At the same time, it should avoid water flowing impact on the live
parts such as the wiring harness connectors and fuses (especially the charging sockets. No Water!), and make sure the luggage
won’t
get water into it.
TIPS:
Please disconnect the
power switch
before cleaning.
Do not use strong water jet to directly wash it, so as to avoid the default
of mechanical parts caused by water invasion.
Storage: try to park it in a dry and cool room to reduce the exposure to
sun and rain and avoid the reduction of service life due to corrosion of
parts. When left unused for a long time, please turn off the
power
switch
and disconnect the power supply circuitto prevent over
discharging.
After long-term storage, please fully charge it before use.
Содержание Cit-e
Страница 1: ...C i t e...
Страница 10: ......
