Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
74
CONTROL AND USER INTERFACE
The software of this device is developed using Qt. LGPL version.
Screen
4.3-inch color liquid crystal display
Number of Pixels
480
272 pixels
Number of Colors
16 million colors
Operational
Procedure
Touch screen
Software
Dedicated control and analysis software has been preinstalled.
Memory
Built-in micro SD card (4 GB)
Measurement data (about 20,000 hours)
Data output
USB memory (CSV files)
Display Mode
Digital display, Trend graph, Level gauge
Display
Measurement mode, instantaneous value, average, maximum,
remaining battery life, current time, GPS positioning
information
Power-Saving
Function for Screen
When there has been no touch operation for a predetermined
time, the screen brightness is automatically decreased.
Alarm Function
It is possible to set an alarm value (0 to 2000 μg/Nm
3
) for the
built-in buzzer.
GPS Function*
The GPS unit has been mounted and measurement positions are
automatically recorded. (4 or more satellites)
Precision: +/-5.3 m (5 or more satellites)
*
The GPS unit may be unusable when the instrument is used indoors or the satellite
radio wave condition is bad.
EXTERNAL CONNECTION FUNCTION
USB Port
It is possible to export measurement data using a USB memory.
RS-232C Port
For an extended option
GPIO
(External Contact
Input/Output)
For an extended option
DIMENSIONS AND WEIGHT
Dimensions
207 (W)
115 (D)
140 (H) (mm) (except protrusions)
Weight
1.6 kg (including battery)
POWER SUPPLY
Battery
Dedicated NiMH battery
Continuous
Operation Time
Approximately 5.5 hours at 25
C
Charging Time
Approximately five hours after empty condition
