(2) Fastening and detachment
Push the POP Nut perpendicularly into the hole in the base material and pull the
trigger (Figure 7-2).
Keep pulling the trigger throughout fastening and detachment.
Otherwise, detachment cannot be completed.
The POP Nut is fastened and the tool automatically switches to reverse rotation to
detach from the POP Nut (Figure 7-3).
Pull lightly
Keep pulling
Figure 7-3
Trigger
Figure 7-2
Pull
Trigger
Base material
Catuion
Hold the base material with jigs to prevent rotating with mandrel.
[Precautions on fastening]
①
Fit the flange of the POP Nut closely against the base material.
An opening between flange and base material may cause decrease in torque of POP
Nut or deformation of base material.
OK NG
Figure 7-6
②
Do not tilt the tool or may cause tilted fastening or damage of mandrel. .
NG
OK
Figure 7-7
③
Do not caulk double. (Do not fasten a POP Nut again after it has initially been
fastened once). If you try to refasten a POP Nut that has already been fastened, either
the tool or the POP Nut will break.
[Precautions on tool detachment]
Pull the tool lightly when detachment. (See Figure 7-3)
17
