Nippon Gases 2405023, Руководство пользователя, Страница: 16 / 24

16
PORTABLE ELECTRODE
HEATER
PT
ES
EN
1. OPERATING INSTRUCTIONS FOR TEMPERATURE SETTING ON DIGITAL
TEMPERATURE CONTROLLER
1. Press & hold switch 1.
2. To decrease temperature setting: While holding down switch 1, press switch 2.
3. To increase temperature setting: While holding down switch 1, press switch 3.
4. Release all switches when temperature is set.
5. In normal position (without switch pressed) the digital readout shows the current
temperature of the inner chamber of oven.
6. When set temperature is reached, it cuts-off automatically. After a few degree drop the
oven switches on again.
7. Indicating bulb will glow red when heater is on.
2. SAFETY INSTRUCTIONS
4.1. Never keep the quiver in a wet area or on a wet floor.
4.2. Don't touch quiver surface with unprotected hands. Always use the insulation / safety
gloves.
4.3. Make sure all electrical connections are secure.
AVISO:
Disconnect the Power Supply when quiver in not in use.