S
TARLIGHT
F
UN
C
ENTER
O
PERATION
M
ANUAL
S
ECTION
3.2 F
UN
C
ENTER
W
IRE
C
ONNECTIONS
P
AGE
23
OF
32
3.2.2 Wire Harness Connections
The wire harness connects components that work together to provide power to the
Wii Remote, allow the player to connect/disconnect the Nunchuk, and communicate
with the Wii console.
When the controller select PCB and controller repeater modules are working, you
can see illuminated LEDs.
Blinks slowly
Stays steady
On the
controller
select PCB,
the green
LED blinks
(ON for
four
seconds,
OFF for
On the
controller
repeater
module, the
green LED is
Check the connections at
the:
•
Controller select PCB
•
back of
both
controller
repeater modules
As you check the
connections, inspect the
cables for damage.
Turns red when the Nunchuk is activated
