11
CUSTOMER CARE - NZ: 0800 002 999
Fig. 14
Fig. 15
Assembly and Use for the Bowl
ASSEMBLY
WARNING:
Never leave the appliance unattended while in use.
Fig. 16a
Fig. 16b
IMPORTANT:
Make sure that the motor
base is plugged in for use.
1
Place the motor base on a clean, dry, level
surface such as a counter or table top.
2
Align and lower the Bowl onto the motor
base. (
Fig. 14
) Handle should be aligned
slightly to the right of the “
LOCK
” symbol on
the motor base.
3
Rotate the bowl clockwise as far as it will go
to lock in place. (
Fig. 15
)
4
The bowl can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(
Fig. 16a, Fig. 16b
)
5
Holding the desired blade by the top of the
shaft, place it onto the drive gear inside the
bowl. Ensure that the attachment is seated
properly and is standing upright. (
Fig. 17
)
NOTE
: The blade will fit loosely on the star-
shaped post.
6
Add the ingredients to the bowl, making sure
that they do not exceed the highest measured
marking line on the side of the bowl.
7
Holding the lid from the feed chute, place
it on top of the bowl and turn clockwise
aligning the arrow ( ) located on the lid with
the arrow ( ) located on the bowl’s handle.
(
Fig. 18
)
8
Plug the power cord into the electrical outlet
and press up on the power toggle ( ) to turn
the power “On”.
NOTE: The bowl is not intended for
blending drinks. Do not exceed the “Max
Fill” mark on the bowl.
NOTE:
To add liquids during
processing, remove the food
pusher from the feed chute to
drizzle in liquids. Do not remove
the lid while in use.
TIP
: Turn the unit down to the
lowest setting before adding
additional liquids.
Dough &
Processing
Fig. 17
Fig. 18
/
/
/
/
Dough &
Processing
