10
11
0800 862 0453
www.ninjakitchen.eu
CAUTION
: Never insert your hands in the
pitcher as the blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher. Unplug the unit before
attempting to dislodge anything.
12
Make sure that the unit is unplugged when
not in use.
TIPS:
• Use low speed settings (1-3) when blending
drinks and other blended items.
• Use medium speed settings (4-6) when
frozen blending, ice crushing or grinding dry
ingredients.
• Use high speed settings (7-10) when
creating purees such as sauces, dips and
restaurant quality glazes. Top blades are
needed to power through tough ingredients
like ice, solid fruits and vegetables. If silky
smooth results are desired, push down on
the power toggle to turn off the power,
carefully remove the top blades, replace the
lid and continue processing.
• For softer ingredients, the bottom fixed
blades are enough to fully process in one
step.
7
Plug the motor base in for use.
8
Turn the Variable Speed Dial to speed 1.
(
Fig. 6
) The power indicator light
( )
will now
turn on.
To start the blender, press the “Start/Stop/
Pulse” toggle up to start processing. Slowly
increase to desired speed.
NOTE: As a safety feature, the power
indicator light ( ) will flash and the
motor will not work if the pitcher and lid
are not installed correctly.
NOTE
: If you need to Pulse ingredients press
down on the toggle in short intervals.
9
When you have reached your desired
consistency, reduce speed slowly and stop the
unit by pressing up on the Start/Stop/Pulse
toggle. (
Fig. 7
)
10
Use the convenient pour spout when serving
smoothies, juices and other beverages you
have created! Push the pour spout back as
far as it will go before pouring. For thicker
consistencies, remove the lid and the top
blades carefully (by the shaft), then empty the
contents from the pitcher.
11
To remove the lid, press the release button on
the lid, pull the lid handle up to a 90° angle
and lift the lid off. Holding the pitcher with
one hand while removing the lid with the
other will provide the best leverage. Turn the
pitcher counter clockwise and then lift off the
base. Do not pour out ingredients without
first carefully removing the top blades.
(
Fig. 8
)
Assembly and Use for the 2.1 L Pitcher - cont.
Fig. 7
USE
REMOVAL
Fig. 6
Fig. 8
WARNING:
Never leave the appliance unattended while in use.
IMPORTANT:
Make sure that the motor
base is plugged in for use.
1
Place the motor base on a clean, dry, level
surface such as a counter or table top.
2
Add ingredients to the single serve cup.
NOTE:
Do not overfill! To avoid spilling, do
not add ingredients past the “MAX FILL” line.
3
Place the single serve blade onto the cup and
screw it on tightly until you have a good seal.
(
Fig. 9
)
4
Turn the single serve cup upside down and
place it onto the motor base, aligning the tabs
on the cup with the motor base. (
Fig. 10
)
Turn clockwise until the cup locks in place,
the unit is ready for use. (
Fig. 11
)
5
Turn the Variable Speed Dial to the Single
Serve icon. The single serve cup only operates
at one speed regardless of which number is
chosen on the dial. Press down on the “Start/
Stop/Pulse” toggle in short intervals until you
have reached your desired consistency.
(
Fig. 11
)
Fig. 9
Fig. 10
Assembly and Use for the Single Serve Cup
Fig. 11
Fig. 12
Fig. 13
ASSEMBLY
PULSE
REMOVAL
For best results, use short
“PULSES”
... Practice makes perfect!!
6
When you have reached your desired
consistency, turn the single serve cup counter-
clockwise (
Fig.12
) and pull straight up to
remove. (
Fig. 13
)
7
Turn the cup upright and remove the single
serve blade by twisting the blade assembly
counter clockwise.
8
Place the Sip & Seal
™
To-Go drinking lid onto
the single serve drink cup, screw on to seal
and enjoy!
9
Make sure that the motor base is unplugged
when not in use.
