background image

Trim ingredients so they are  

in 4" to 5" pieces or slightly over 

the height of the feed chute.  

DO NOT

 cut ingredients smaller 

than the size of the feed chute. 

Cut both ends off ingredients 

to create flat surfaces. 

Trim tapered ingredients like 

carrots to make them more 

symmetrical.

Larger ingredients, such 

as potatoes, may need to 

be cut in half lengthwise. 

5"

5"

USING THE CHOPPING & DOUGH BLADE ASSEMBLIES

1.

 

Select DISC or LOW. The 

disc will begin spinning.

IMPORTANT:

 Use only the DISC 

program or LOW setting when 

using the Slicing/Shredding Disc.

2.

 

Add ingredients through 

the feed chute on the lid. 

Use the food pusher to 

help guide the ingredients.

4.

 

Remove bowl from base by 

turning it counterclockwise, 

then lifting it up.

PARTS

FOOD PREP

ASSEMBLY

PRECISION 

PROCESSOR® 

BOWL

PRECISION 

PROCESSOR 

BOWL LID WITH 

FOOD PUSHER 

DISC SPINDLE

REVERSIBLE 

SLICING/SHREDDING 

DISC

3.

 

 

The disc will automatically stop 

spinning at the end of the program. 

Wait for disc to stop turning, then 

press the button on the feed chute 

lid near the handle to unlock. Turn 

lid counterclockwise and lift lid 

from bowl. Remove disc and spindle 

before emptying.

USING THE REVERSIBLE SLICING/SHREDDING DISC

4.

Place feed chute lid 

on bowl and turn 

clockwise to lock 

in place. 

2.

 

Install the disc 

spindle in the bowl.

1.

Place Precision Processor

Bowl on base and turn 

clockwise to lock in place.

PROCESS & ENJOY

1.

 

Select any 

program to 

begin processing.

2.

When processing is 

complete, press button 

on feed chute lid near 

handle to unlock. Turn lid 

counterclockwise and lift 

from bowl.
Remove blade assembly 

before emptying bowl.

PARTS

3.

Place feed chute lid 

on bowl and turn 

clockwise to lock in 

place. 

ASSEMBLY

WARNING: 

Chopping Blade Assembly is sharp and not locked in place. Before pouring, carefully 

remove Chopping Blade Assembly. Failure to do so will result in a risk of laceration. Refer to the 

Ninja Owner’s Guide for additional information.

1.

Place Precision 

Processor Bowl 

on base and turn 

clockwise to lock 

in place.

PRECISION 

PROCESSOR® 

BOWL

PRECISION 

PROCESSOR 

BOWL LID WITH 

FOOD PUSHER

CHOPPING BLADE 

ASSEMBLY

DOUGH BLADE  

ASSEMBLY

3.

 

Remove bowl from 

base by turning it 

counterclockwise, 

then lifting it up.

2.

 

Holding the blade 

assembly by the top 

of the shaft, install it 

in bowl.

3.

Use the finger holes to grasp 

disc and place it over the 

spindle, with the side you 

would like to use facing up.

NOTE: 

The Slicing/Shredding 

Disc is reversible. Use the side 

labeled “Slicer” for slicing and 

the side labeled “Shredder” for 

shredding.

NOTE: 

Ensure cheese is well chilled before slicing/shredding. 

DO NOT

 slice or shred frozen cheese. 

SHREDDING

SLICE/SHRED & ENJOY

Once the Precision Processor Bowl is locked onto base, plug in the unit, 

then press the Power button

 

 to turn the unit on. 

Once the Precision Processor Bowl is locked onto the base, plug in the unit, 

then press the Power button

 

 to turn the unit on. 

SHREDDER

SLICING

SLICER

Отзывы: