www.ninjakitchen.com
7
Fig. 1
CAUTION:
Blades are sharp! Use extreme
caution when handling the blending
shaft.
IMPORTANT
: Do not use the blending
shaft in the processing bowl.
1
To attach the blending shaft to the power
head, place the power head onto the
blending shaft and rotate to match the
arrows to lock in place. (
Fig. 1
)
2
Plug the electrical cord into an wall
outlet.
3
Attach the storage lid/non-slip base to
the bottom of the blending cup. (
Fig. 2
)
4
Place the food into the blending cup
and then place the splash guard on the
blending cup. Make sure that the splash
guard is firmly attached to the top of the
blending cup. (
Fig. 3
)
5
Insert the blending shaft through the
opening on the splash guard so that
the blades are resting on top of the
ingredients. (
Fig. 4
)
6
Press and hold the power button. The
blending shaft will continue to blend
as long as the power button is pressed.
Move blending shaft up and down at an
angle to combine ingredients.
7
Always release the power button before
removing the blending shaft from the
food, especially when blending hot food
or liquids. Always hold the power head
with your hand and never leave the
appliance unattended while in use.
NOTE:
It is not recommended to
operate
the appliance continuously for more than
2 minutes at a time.
8
To stop the appliance, release the power
button.
9
If you need a stronger burst of power,
press the turbo button.
10
When finished blending, unplug the
appliance from the outlet and remove the
blender shaft from the power head by
turning the power head clockwise.
CAUTION
: Never remove the blending
shaft from the container while the unit is
plugged in.
Using the Ninja
®
Warrior
™
Blending Shaft Attachment
Fig. 2
Use caution when
blending in a saucepan.
Fig. 3
Fig. 4
For best results move the blending
shaft up and down at an angle
while blending.
NJ200_30_IB_ENG_110112.indd 7
11-01-12 11:01 AM
