19
ninjakitchen.com
18
ninjakitchen.com
CARE & MAINTENANCE
USING THE BLENDER
FOR STUCK-ON INGREDIENTS
1
After processing, immediately clean the
container and blade assembly under
warm, soapy water.
2
Depending on the container, fill with soap
and water according to the following
instructions:
Power Pitcher:
With the dough or stacked blade
assembly installed, fill with warm water up
to DOUGH MAX line and add 1 or 2 small
drops dish soap. Secure pitcher lid, and
ensure the pour spout is securely closed.
Power Nutri Cup:
Fill halfway with warm water and
add 1 small drop dish soap. Install
blade assembly.
3
Install the container on the motor base.
Select BOWL, then press START/STOP.
4
Once program is complete, thoroughly
rinse container and blade assembly under
warm, soapy water. Use the included
cleaning brush to remove any remaining
residue.
CLEANING
Hand-Washing
Wash containers, lids, and blade
assemblies in warm, soapy water.
Use a dishwashing utensil with
handle to avoid direct contact
with the blades. Use the included
cleaning brush to remove excess
residue, such as when dealing with
stuck-on ingredients, like doughs
and batters. Exercise care when
handling the blade assembly as
the blades are sharp. Thoroughly rinse and
air-dry all parts.
Dishwasher
Containers, lids, and blade assemblies are
dishwasher safe. Ensure the blade assembly
and lid are removed from the container
before placing in the dishwasher.
Motor Base
Unplug the motor base before cleaning.
Wipe motor base with a clean, damp cloth.
DO NOT
use abrasive cloths, pads, or
brushes to clean the base.
STORING
For cord storage, wrap cord with hook-and-
loop fastener near the back of the motor
base.
DO NOT
wrap the cord around the
bottom of the base for storage.
DO NOT
store blended or unblended
ingredients in the cup with the blade
assembly attached.
DO NOT
stack items on top of the
containers. Store any remaining attachments
alongside the unit or in a cabinet where they
will not be damaged or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1
Unplug the unit from the electrical outlet.
2
Allow the unit to cool for approximately
15 minutes.
3
Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT:
Ensure that maximum
capacities are not exceeded. This is the most
typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288. So we
may better assist you, please register your
product online at
registeryourninja.com
and
have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit
ninjaaccessories.com
.
1 SMALL DROP OF DISH SOAP
FILL WATER HALFWAY
1 OR 2 SMALL DROPS OF DISH SOAP
FILL WATER TO
DOUGH MAX LINE
NOTE:
For best results, use a dishwasher
to remove stuck-on ingredients.
NOTE:
For best results, use a dishwasher
to remove stuck-on ingredients.
