Ninja DCM200 Series Скачать руководство пользователя страница 9

15

ninjakitchen.com

14

1-877-646-5288

Please visit registeryourninja.com or call 1-877-646-5288 to register your new Ninja® product 

within ten (10) days of purchase. You will be asked to provide the store name, date of 

purchase, and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety 

notification. By registering, you acknowledge you have read and understood the instructions 

for use and warnings set forth in the accompanying instructions. 

PRODUCT REGISTRATION

To order additional parts and accessories, visit 

ninjaaccessories�com

 or contact Customer 

Service at 

1-877-646-5288

.

REPLACEMENT PARTS

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of 

SharkNinja Operating LLC.

 Warranty coverage applies to the original owner and to the 

original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for 

a period of one (1) year from the date of purchase when it is used under normal household 

conditions and maintained according to the requirements outlined in the Owner’s Guide, 

subject to the following conditions and exclusions:

What is covered by this warranty?

1.   The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole 

discretion, will be repaired or replaced up to one (1) year from the original purchase date.

2.   In the event a replacement unit is issued, the warranty coverage ends six (6) months 

following the receipt date of the replacement unit or the remainder of the existing 

warranty, whichever is later. SharkNinja reserves the right to replace the unit with one 

of equal or greater value.

What is not covered by this warranty?

1.   Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, 

blender bases, removable pots, racks, pans, etc.), which require regular maintenance 

and/or replacement to ensure the proper functioning of your unit, are not covered by 

this warranty. Replacement parts are available for purchase at 

ninjaaccessories�com

2.   Any unit that has been tampered with or used for commercial purposes.
3.   Damage caused by misuse, abuse, negligent handling, failure to perform required 

maintenance (e.g., failure to keep the well of the motor base clear of food spills and 

other debris), or damage due to mishandling in transit.

4.  Consequential and incidental damages.
5.   Defects caused by repair persons not authorized by SharkNinja. These defects include 

damages caused in the process of shipping, altering, or repairing the SharkNinja 

product (or any of its parts) when the repair is performed by a repair person not 

authorized by SharkNinja.

6.  Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions 

within the warranty period, visit 

ninjakitchen�com/support

 for product care and maintenance 

self-help. Our Customer Service Specialists are also available at

 1-877-646-5288

 to assist 

with product support and warranty service options, including the possibility of upgrading 

to our VIP warranty service options for select product categories. So we may better assist 

you, please register your product online at 

registeryourninja�com

 and have the product on 

hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or 

replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships 

the repaired or replacement unit.

How to initiate a warranty claim

You must call 

1-877-646-5288

 to initiate a warranty claim. You will need the 

receipt as proof of purchase. We also ask that you register your product online at 

registeryourninja�com 

and have the product on hand when you call, so we may better 

assist you. A Customer Service Specialist will provide you with return and packing 

instruction information.

How state law applies

This warranty gives you specifi c legal rights, and you also may have other rights that vary 

from state to state. Some states do not permit the exclusion or limitation of incidental or 

consequential damages, so the above may not apply to you.

ONE (1) YEAR LIMITED WARRANTY

Содержание DCM200 Series












Отзывы: