41
ninjakitchen.eu
40
ninjakitchen.eu
3
Exercising care, grasp the Chopping
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the bowl . Note that the Chopping
Blade Assembly will fi t loosely on the
drive gear .
4
Add ingredients to the bowl, making
sure not to exceed the MAX FILL line .
5
Place the feed chute lid on the bowl and
turn clockwise until you hear a click,
indicating the lid is locked in place .
1
Remove all packaging materials from
the appliance . Exercise care when
unpacking blade assemblies . All blade
assemblies are sharp .
2
The Chopping Blade Assembly is
NOT
locked in place in the bowl . Handle the
Chopping Blade Assembly by grasping
the top of the shaft .
3
Wash bowl, lid, disc, and blade
assemblies in warm, soapy, water using
a dishwashing utensil with a handle to
avoid direct contact with the blades .
Exercise care when handling blade
assemblies, as the blades are sharp .
4
Thoroughly rinse and air-dry all parts .
5
Wipe control panel with a soft cloth .
Allow it to dry completely before using .
BEFORE FIRST USE
IMPORTANT:
Review all warnings on
pages 36-38 before proceeding.
IMPORTANT:
DO NOT run the unit on
HIGH if using the dough blade.
IMPORTANT:
The unit is NOT intended
to crush ice. Refer to warnings.
NOTE:
All attachments are BPA free and
dishwasher safe . It is recommended that
the bowl, lid, disc, and blade assemblies
be placed on the top rack of the
dishwasher . Exercise care when handling
blade assemblies .
FEATURES
Auto-iQ® PROGRAMS
The Power button should be used to turn the unit on or off .
AUTO-IQ®
Intelligent preset programs combine unique processing and pausing patterns that do
the work for you . Once an Auto-iQ® program is selected, it will start immediately and
automatically stop when processing is complete . To stop processing before the end of
a program, press the currently active button again .
MANUAL PROGRAMS
LOW and HIGH
When selected, each of these speeds
runs continuously until turned off . They
do not work in conjunction with any
preset Auto-iQ® programs .
PULSE
Off ers greater control of pulsing and
processing . Operates only when PULSE is
pressed . Use short presses for short pulses
and long presses for long pulses .
CHOP
Timed pulses and pauses give you
consistent chopping results . Run
program once for a large chop, twice
for a small chop and three times if you
prefer it even fi ner .
PUREE
Create anything from silky-smooth sauces
to the perfect hummus .
SLICE
Use with the reversible disc shaped blade
to quickly slice or grate cheese and
vegetables with minimal eff ort .
MIX
Quickly mix together doughs and batters
for pizzas, bread, pastry and cakes .
IMPORTANT:
As a safety feature, if the
blade assembly is not fully seated, you
will not be able to install and lock the lid
in position .
NOTE:
DO NOT
add ingredients before
completing installation of the blade
assembly .
NOTE:
Please follow the same instructions
to install the Dough Blade Assembly .
USING THE FOOD PROCESSOR BOWL
1
Place motor base on a clean, dry, level
surface such as a worktop or table .
2
Lower the Food Processor Bowl onto
the motor base and rotate clockwise
until it clicks into place .
BN650UK
mylar surface: Pantone black
PREVIEW WHEN ON
OUTLINE
PREVIEW WHEN OFF
LED KEY
white LEDs
BUTTON PLACEMENT
GRAPHICS KEY
graphics: cool gray 2C
mylar material: frosted and
smoke tinted
graphics: Pantone white
graphics: Pantone 7579C
satin chrome
ENGLISH
